SUZANNE'S CARPET & TILE LLC MASTER TERMS AND CONDITIONS OF SERVICE & INSTALLATION
Suzanne's Carpet & Tile LLC
372 Mountain View Rd, Unit 7, Berthoud, CO 80513
Phone: (970) 532-0620 / (970) 290-7498 | Email: office@sctfloorcovering.com | Web: www.sctfloorcovering.com
____________________________________________________________________________________________________________________________________________________________________________________
1. ESTIMATES, ON-SITE MEASUREMENTS, & DEPOSITS
● On-Site Measurement Verification: All preliminary estimates provided prior to an in-person site visit are estimates only. Final project acceptance and pricing are contingent upon an on-site physical measurement by Suzanne’s Carpet & Tile LLC ("SCT") to verify exact square footage, layout, subfloor conditions, and scope of work.
● Deposit Requirement: A 75% deposit (unless otherwise agreed upon in writing) is required upon estimate approval. Flooring materials will not be ordered and installation dates will not be confirmed or reserved on our master calendar until the required deposit payment has been received in full.
● Special Order Materials: All special-order flooring products, custom carpet rolls/cuts, non-stock luxury vinyl plank/tile (LVP/LVT), custom tile, and installation accessories are 100% non-returnable and non-refundable once ordered from the manufacturer or distributor.
2. PAYMENT TERMS, FEES, & ACH DISCOUNTS
● Final Payment: The remaining invoice balance is due immediately upon completion of the installation work.
● Any additional work requested by the client, or required due to unforeseen job-site conditions, will be quoted separately and may result in additional labor, material charges, and project delays.
● Accepted Payment Methods & Surcharges:
- Cash & Personal/Business Checks: Accepted with no additional processing fees,
- Electronic Check / ACH Bank Transfer: Subject to a $20 transaction convenience fee (unless an ACH discount promotion applies, such as a 2% total bill discount applied against the final balance when paid in full via ACH).
- Credit & Debit Cards: Subject to a mandatory 4% transaction processing fee.
● Overdue Balances: Accounts unpaid beyond 14 days post-completion are subject to late fees, interest, lien rights, and legal collection costs.
3. JOB SITE CLIMATE & ADHESION REQUIREMENTS (70°F RULE)
● Climate Control Mandatory Requirement: Property owners/clients must ensure the job site maintains a consistent indoor ambient temperature of at least 70°F (68°F–72°F range) for a minimum of 6 hours prior to installer arrival, throughout the installation, and for 48 hours post-installation. Proper temperature control is critical for material acclimation, adhesive bonding, and click-lock integrity. Failure to maintain required job site temperatures voids all installation and adhesion warranties.
4. AREA CLEARANCE, FURNITURE MOVING, & LIABILITY
● Client Area Preparation: Clients are responsible for completely clearing all work areas before installers arrive. All small items, lamps, electronics, artwork, window coverings, wall decor, and breakables must be removed. Closets must have at least 3 to 4 feet of floor-up working clearance.
● Furniture Moving Courtesy & Disclaimer: When furniture moving is explicitly included in the estimate, SCT crews will move standard, heavy, or large furniture pieces with care. However, antique, heavy, large, or aged furniture may possess pre-existing weak joints, dried glue, fragile veneer, or loose frames. Client agrees that SCT and its installers assume NO financial or material liability for damage to heavy, antique, or fragile furniture moved during the project.
● Unpacked Contents: Installers will NOT move unpacked drawers, contents of cabinets, bookcases, glass shelves, or entertainment centers. SCT accepts no liability for items left inside furniture or in the work area.
5. SUBFLOOR PREPARATION, MOISTURE, & UNFORESEEN SITE CONDITIONS
● Subfloor Teardown & Estimation: Estimates include a standard allowance for routine subfloor prep (minor sanding, scraping, and patching). The true structural condition, moisture level, levelness, and integrity of concrete slabs or subfloors under existing carpet, tile, or vinyl cannot be fully inspected until teardown is complete.
● Additional Subfloor Work & Change Orders: If severe unlevelness, concrete cracking, expansion joint repairs, rot, or high moisture emissions are uncovered upon teardown, additional floor preparation (such as self-leveling underlayment, grinding, or moisture barriers) will be required. Additional labor and materials will be documented in a written Change Order and billed accordingly.
● Warranty Compliance: Flooring manufacturer warranties strictly mandate subfloor compliance. If a client declines recommended subfloor preparation, all material and installation warranties are immediately voided.
6. APPLIANCES, PLUMBING, & DISHWASHER DISCLAIMER
● Appliance Disconnect & Reset: SCT crews can disconnect and reset basic free-standing appliances (refrigerators, stoves, washers, dryers, toilets) as specified in the estimate.
● Plumbing Connections & Shut-Off Valves: Appliance and toilet resets assume all plumbing valves, supply lines, and drain connections are in sound working condition. SCT installers are NOT licensed plumbers. Plumbing shut-off valves, water supply lines, and internal fixture connections are NOT covered under SCT’s installation warranty. Client assumes full responsibility for inspecting and confirming that all plumbing connections remain leak-free after reset.
● Damaged / Frozen Valves: If plumbing valves fail to shut off completely or connections fall outside installer capabilities, client must hire a licensed plumber at client’s expense.
● Dishwashers: If dishwasher plumbing or electrical lines cannot be safely disconnected, new flooring will be installed up to and just under the front lip of the unit to preserve a finished appearance.
7. WALLS, BASEBOARDS, PAINT TOUCH-UPS, & TRIM
● Post-Installation Touch-Ups: Demolition, heavy material handling, baseboard removal, and pneumatic nailer installation naturally involve physical contact with wall base, trim, and casings. Minor wall scuffs, paint touch-ups, caulk touch-ups, and nail-hole filling are standard post-installation requirements and remain the sole responsibility of the client or client's painting contractor.
● Pre-Painted Baseboards: If baseboards are pre-painted by client’s painter prior to installation, baseboards must be delivered to the property at least 72 hours prior to install to allow full paint curing.
8. CONSTRUCTION DUST & POST-INSTALLATION CLEANING
● Construction Dust Notice: Teardown, floor sanding, subfloor grinding, tile cutting, and carpet stretching generate fine dust. Dust will settle on surfaces, cabinets, windows, and light fixtures. Clients should expect to perform general dusting and surface wiping after installation.
8a. INCLEMENT WEATHER, CONSTRUCTION DUST, & DEBRIS
● Outdoor Work & Inclement Weather: Cutting or installation activities will not be performed outside during inclement weather conditions.
● Construction Dust & Debris: Flooring installation, tile cutting, and demolition are construction activities that inherently produce dust and debris. While our installation team will perform a thorough sweep-out upon completion, fine dust and debris remnants should be expected and are not considered poor workmanship, material defects, or job-site cleaning failures. Note: Cleaning Service Referral: SCT offers their clients a discounted rate for post-renovation clean-ups through Keen Klean.
9. MATERIAL CHARACTERISTICS, CARPET SEAMS, & TILE GROUT
● Carpet Seam Telegraphing / Peaking: Carpet seams are joinery seams, not invisible boundaries. Certain carpet constructions—particularly low cut-pile, loop, berber, and structured nylons—may exhibit visible seam placement or seam tape "peaking/telegraphing" even when seamed strictly to carpet installation standards.
● Color & Shade Variations: Flooring products, tiles, natural stone, and carpet dye lots naturally vary in tone and texture from display samples to actual factory production runs.
● Client-Supplied Materials: If client provides their own tile, grout, caulk, or flooring materials, SCT provides a warranty on installation labor ONLY. SCT provides no warranty on client-supplied materials or material defects.
10. FLOORING PRODUCT LIMITATIONS & CUSTOMER SELECTIONS
● Samples, showroom displays, photographs, and digital images are intended to represent the general appearance of a product. Actual installed materials may vary in color, texture, sheen, pattern, and overall appearance due to lighting, manufacturing processes, dye lots, and production variations.
● Natural stone, wood, tile, and other flooring products may contain variations, knots, veining, shade differences, texture changes, and other naturally occurring characteristics that are not considered defects.
11. WARRANTIES
● 1-Year Workmanship Warranty: Suzanne’s Carpet & Tile LLC provides a 1-Year Limited Workmanship Warranty covering installation defects under normal residential use from the date of job completion.
● Manufacturer Product Warranties: All material warranties (stain resistance, surface wear, waterproof rating, structure) are provided directly by the product manufacturer and are subject to their respective terms and conditions.
12. GOVERNING LAW & LEGAL JURISDICTION
● Colorado Law & Venue: These terms and conditions are governed by the laws of the State of Colorado. Any legal action or dispute arising out of or related to SCT services or installations shall be litigated exclusively in the state courts of competent jurisdiction located in Larimer County, Colorado. Prevailing parties shall be entitled to recover reasonable attorneys' fees and costs.